Funbox Pro V 12’6 x 29” rigid and light, an excellent race board!
You dreamed of a Race stand up paddle board without storage or transport problems? Here it is! It has breathtaking rigidity, a new system RAILING TAIL (Sharpened rail on the back of the board) which avoids turbulence at the back of the board and provides more grip as well as better control. Very little Row effect, the board stays on course. Perfect for athletes who want to push their limits as far and as long as possible. Ideal for racing, downwind, leisurely strolls and sporty strolls. The legislation concerning inflatable SUPs will be respected outside the 300m thanks to its double chamber technology at the front! This technology also optimizes the penetration performance in water and its V under the hull will give you an optimal gliding sensation very close to the performance of a rigid board.
New Woven Dropstitch fusion en double layer construction allowing our Pro range boards to be stiffer and lighter. This "Woven" manufacturing avoids the phenomenon of stretching and deformation guaranteeing excellent rigidity for a very light board. A construction that is found in many other brands at prices up to three times higher.
It is equipped with a removable interchangeable central fin which allows a good depth without hindering the folding of the Board. The reinforced inflation valve is located at the end of the board to facilitate inflation as well as deflation.
It has a location for backpacks or waterproof bags.
Also included in the pack:
* PRO-SERIE BAG: high quality wheeled bag with reinforced seams for storing the board. Dimensions with the board: 90 x 50 cm.
* SUP HP PUMP: with pressure gauge.
* REPAIR KIT: patches for patches, PU glue and inflation valve tightening wrench.
* LEASH TELEPHONE: comfortable with its Neoprene bracelet and its ankle strap in velcro and anti-spin system.
Volume: 325 liters - Pressure: 17 psi
Weight of board only with fins: 9,2 kg
Weight of bag with board and accessories: about 15 kg
// WARNING //
Start by inflating your board up to 17 PSI puis then inflate the double chamber located at the front of the board slightly just put it in shape!